Graphica Gauges & Tools
Wadgaon Sheri, Pune, Maharashtra
Send E-mail
Send SMS
Home»Our Products»

Thread Ring Gauges

Pioneers in the industry, we offer thread ring gauge, ring gauges, plain ring gauge, iso metric thread ring gauges, mj thread ring gauges and unified thread ring gauges from India.

REQUEST CALLBACK
Approx. Rs 500 / onwards
Get Best Quote

Gauges to check Tapped Hole to receive Thread Ring Gauge.These gauges are used for checking oversize tapping, done for fitting wire thread inserts.The threads before fitting wire thread inserts are checked with these gauges.

Specification :

BS 4377-1991 for ISO Metric Threads.

Manufacturing Range :

We manufacture Wire Thread Inserts for ISO Metric, Unified, BSW/BSF/Whits,metric threads,heli thread gauges, BSP/G Thread Profiles.


Yes! I am Interested
REQUEST CALLBACK
Approx. Rs 500 / onwards
Get Best Quote

Leading supplier and exporters of Ring Gauges ,ptf thread ring gages,nptf thread ring gauges. NPTF Threads can provide pressure tight seal on threads without use of a sealing compunt (Dry Seal Type). They are used in pipe assemblies where without using sealing compound pressure tight joint is required on threads.

PTF Threads are similar to NPTF but short in length. PTF threads are used in applications similar to NPTF.

Specification :

ANSI/ ASME B1.20.6 - 1984 which is Metric translation of ANSI B1.20.5-1978 & American Handbook H-28 Part II - 1957.

Manufacturing Range :

Taper Thread Plugs L1 & L3 in both Basic & Step Limit Design, Plain Taper Plugs to check crest of Threads,Taper Thread Rings L1 & L2 in both Basic & Step Limit Design, Plain Taper Rings to check crest of external threads (6 step design), Master Check Plugs to check Thread Rings L1 & L2.

Pipe Sizes covered are from 1/16" to 3"


Yes! I am Interested
REQUEST CALLBACK
Approx. Rs 500 / onwards
Get Best Quote

Plain Ring Gauges are used for attribute Inspection of Plain External Diameter measurement.

 Specification of Plain Ring Gauge:

Basic Dimensions: ISO 286 Part 1 & 2 - 2010/ IS 919 Part 1 & 2 1993.

Gauging Practice: DIN 7164 - 1966 & IS 3455-1971 / IS 7876-1975.

 

Manufacturing Range of Plain Ring Gauge:

Limit Type Plain Ring Gauges (Go & Nogo) - Diameter 1 mm - 300 mm.


Yes! I am Interested
REQUEST CALLBACK
Approx. Rs 500 / onwards
Get Best Quote

Our company is listed at the top in the list of the most eminent Metric Gauge Exporters and Suppliers in India. The notable features i.e. high durability, resistance to corrosion and tensile strength has played a vital role in the enhancement of the demand of Metric Gauge in the international market. Additionally, the Metric Gauge are also available in varied specifications to meet the requirements of the customers.

Metric Gauges are most commonly used Gauges in the Industry.

 

Specification of Metric Ring Gauges:
  • ISO standard : Basic Dimensions: ISO 724 -1993 (E), Gauging Practice: ISO 1502-1996 & ISO 965/1- 1998.
  • Indian standard : Basic Dimensions: IS 4218 (3)-1999, IS 4218 (4)-2001, Gauging Practice: IS 2334- 2001.
  • DIN standard : Basic Dimensions & Gauging Practice: DIN 13.
  • ANSI standard : Basic Dimensions: ANSI / ASME B 1.13 M , Gauging Practice: ANSI / ASME B 1.16 M – 1984.
  • BS standard : Basic Dimensions: B.S. 3643 Part I & II - 2007, Gauging Practice: B.S 919 Part III - 2007.
  • JIS standard : Basic Dimensions: JIS B0205 & JIS B 0209, Gauging Practice: JIS B 0251-1998. As well as old version of specification JIS B 0251-1975 & JIS B 0252-1996, used for Tolerance Classes I, II, & III & two grades - Machine work & Inspection.
Manufacturing Range of Metric Ring Gauges:
  • Diameter 1.6mm to 400mm & Pitches covered are 0.35 mm to 12 mm.

Yes! I am Interested
REQUEST CALLBACK
Approx. Rs 500 / onwards
Get Best Quote

Graphica leading manufacturer and supplier of ring gages,MJ thread gauges, metric threads.MJ Threads are used in Aeronautical Industry - for Metric system.

 

Specification of Ring Gauges:
  • ISO 5855 - Part I, II, III - 1999, OR ANSI B 1.21 M - 1997 & ANSI B1.22 M - 1985.
Manufacturing Range of Ring Gauges:
  • Thread Plug Gauges : 1.6 mm - 90 mm

Yes! I am Interested
REQUEST CALLBACK
Approx. Rs 500 / onwards
Get Best Quote

Manufacturer,Supplier and Exporter of Thread Ring Gauges,Unified Gauges. Unified Threads are used for general purpose fastening applications for Imperial system of units.

 

Specification of Unified Ring Gauges:
  • ANSI/ASME B 1.2-1983.
  • Unified Gauges Basic Dimensions as per BS 1580 Part 1 & 2 - 2007 & Gauging Practice as per BS 919 Part 1-2007 are manufactured if requested by customers.
Manufacturing Range of Unified Ring Gauges:
  • Thread Plug & Ring Gauges from No. 4 (0.112") to 14"

Yes! I am Interested
REQUEST CALLBACK
Approx. Rs 500 / onwards
Get Best Quote

Manufacturer,supplier and exporters of trapezoidal thread plug gauges, trapezoidal thread ring gauges,thread gages,go nogo gauges. Trapezoidal Threads are used for translation motion in machine tools like lead screws, where rapid movement is required or in screw jacks, where load to be shared is more.

 

Specification of Trapezoidal Ring Gauges:
  • ISO Specifications: Basic Dimensions: ISO 2903 - 1993, ISO 2904 - 1977 & Gauging Practice: DIN 103(9)-1985.
  • IS Specifications: Basic Dimensions: IS 7008-1988, IS 7008(4)-1999 & Gauging Practice: DIN 103(9)-1985.

Manufacturing Range of Trapezoidal Ring Gauges:
  • Thread Plugs , Thread Rings, Check Plugs & Wear Check Plugs of Diameter from 8 mm to 355 mm and pitches from 1.5 mm to 12 mm.

Yes! I am Interested
REQUEST CALLBACK
Approx. Rs 500 / onwards
Get Best Quote

Leading manufacturer,suppliers and exporters of NGT (National Gas Taper) Threads are used to check Gas cylinder valve stems and cylindrical neck threads. (Taper 1 IN 16 on diameter)

 

Specification of Taper Ring Gauges:
  • American Handbook H-28 Part II - 1957
  • * 3/4"-14 NGT size is manufacured as per IS 9121-2005 , on customer request.
Manufacturing Range of Taper Ring Gauges:
  • Taper Thread Plugs - Gauge L1 & Gauge L9
  • Plain Taper Plug Gauges to check truncation of Minor diameter - Gauge C1 & Gauge C2
  • Taper Thread Ring Gauge L1 & Gauge L8 Master Check Plug to check Rings L1 & L8 Plain Taper Ring to check crest Truncation of Major Diameter.
  • Sizes covered are from 1/8 NGT to 1.1/2 NGT.

Yes! I am Interested
REQUEST CALLBACK
Approx. Rs 500 / Unit
Get Best Quote
Product Details:
BrandGraphica
ModelAs per your requirement
Measuring RangeAs per your requirement

Supplier and Exporter of UNJ thread ring gauges,unj thread gages,unj gauges. UNJ Threads are used in Aeronautic Industry for Imperial system of units.

Specification :

BS 4084-1996 OR ISO 3161-1999 & ISO 15872-2002.

Manufacturing Range :

Thread Plug Gauges & Thread Ring Gauges from No.4 (0.112") to 6" Diameter & TPI 48 to 4 TPI.


Yes! I am Interested
REQUEST CALLBACK
Approx. Rs 500 / onwards
Get Best Quote

BSW/ BSF/ Whits threads are used where clerance between male & female threads is to be controlled. This uses Imperial system of units.

 Specification :

Basic Dimensions- BS 84-2007 & Gauging Practice: BS 919 Part II - 2007.

 Manufacturing Range :

Thread Plug & Ring Gauges from Diameter 1/8 to 6" , TPI 40 to 2.5


Yes! I am Interested
REQUEST CALLBACK
Approx. Rs 500 / onwards
Get Best Quote

Supplier and Exporters of Pipe thread gauges,pipe thread ring gauges,g thread gauges,screw thred gauges,bsw gauges. Pipe / G Threads are used for general purpose pipe fittings where pressure tight joints are not required on Threads.

Specification :
  • ISO Standard: Basic Dimensions: ISO 228 (1) - 2000 & Gauging Practice: ISO 228 (2) - 1987. British Standard - BS 2779 - 1986.
  • Indian Standard - Basic Dimensions: IS 2643 - 2005 & Gauging Practice: IS 10216-1988.
  • Japanese Standard: JIS B 0202-1999.
Manufacturing Range :

Pipe Diameter 1/16 to 6" Above 6" Diameter sizes (PF) are manufactured as per JIS B JIS B 0202-1999.


Yes! I am Interested
REQUEST CALLBACK
Approx. Rs 500 / onwards
Get Best Quote

Manufacturer,suppliers,exporters of ba gauges,ba thread ring gauges,ba thread gauges. BA (British Association) Threads are used for fine fastening purpose specially in instruments.

 Specification :
  • Basic Dimensions: BS 93-1951 & Gauging
  • Practice:BS 919 Part II - 2007.
 Manufacturing Range :

Thread Plug Gauges, Thread Ring Gauges, Check Plug & Wear Check Plug Gauges for sizes 2,3,4,5,6,7


Yes! I am Interested
REQUEST CALLBACK
Approx. Rs 500 / onwards
Get Best Quote

BS Cycle threads are used in Bicycle Industry.

 Specification :
  • Basic Dimensions: BS 811-1950 & Gauging
  • Practice: BS 919 Part II - 2007.
 Manufacturing Range :

Sizes covered are SWG series for spokes & Nipples - SWG 8,9,10 & 11, Diameter 1/8 to 31/32 with various TPI as specified in specification.


Yes! I am Interested
REQUEST CALLBACK
Approx. Rs 500 / onwards
Get Best Quote

Manufacturer,supplier and exporter of bs conduit thread ring gages,bs conduit ring gauges.BS Conduit threads are used for fittings of electrical conduit pipes used for electrical wiring.


 Specification :

    BS 31-1940


 Manufacturing Range :

Thread Plug , Thread Rings , Check Plug & Wear Check Plug Gauges of Diameter 1/2, 5/8, 3/4, 1, 1.1/4, 1.1/2, 2, 2.1/2"


Yes! I am Interested
REQUEST CALLBACK
Approx. Rs 500 / onwards
Get Best Quote

Leading manufacturer and supplier of pg thread ring gauges,thread ring gauges,ring gauges,pin gauges.PG Threads are based on DIN standard and are used for checking threads of pipe fittings used for electrical wiring.

 Specification :
  • Basic Dimensions: DIN 40430 - 1971 &
  • Gauging Practice: DIN 40431 (2) - 1972.
 Manufacturing Range :

Pg sizes 7,9,11,13.5,16,21,29, 36, 42, 48.


Yes! I am Interested
REQUEST CALLBACK
Approx. Rs 500 / onwards
Get Best Quote

We are renowned as one of the trusted Acme Gauge Manufacturers and Exporters from India. The unmatched quality and inexplicable performance has attracted various national as well as international clients to place bulk orders for the Acme thread Gauge. Additionally, high tensile strength has also made SS Acme Gauge ideal for various industrial applications.

ACME Threads are used for translation motion in machine tools like lead screws, where rapid movement is required or in screw jacks, where load to be shared is more.

 Specification:
  • American Specifications: ANSI/ ASME B1.5- 1997
  • B.S Specifications:B.S 1104 - 1957
 Manufacturing Range :

Thread Plugs , Thread Rings, Check Plugs & Wear Check Plugs of Diameter from 1/4" to 14" and TPI from 16 to 2.


Yes! I am Interested
REQUEST CALLBACK
Approx. Rs 500 / onwards
Get Best Quote

Leading manufacturer,suppliers and exporters of acme threads,acme gages,acme thread gauges,stub acme thread ring gauges. STUB ACME Threads are similar to ACME threads except that the thread depth/ height is less than ACME. These are used for thin walled applications, where coarse pitch is needed like tubes used in Oil fields equipments, where standard ACME threads can not be used due to thin wall.

 Specification :

American Specifications: ANSI/ ASME B1.8 - 1988.

 Manufacturing Range :

Thread Plugs , Thread Rings, Check Plugs & Wear Check Plugs of Diameter from 1/4" to 14" and TPI from 16 to 2.


Yes! I am Interested
REQUEST CALLBACK
Approx. Rs 500 / onwards
Get Best Quote

Leading manufacturer,suppliers and exporters of buttress thread gauges, buttress thread ring gauges,buttress threads. BUTTRESS THREADS are used in the construction of artillery with the screw type breech block / gun barrels OR vices & screw jack. As Buttress Threads can withstand the axial load placed on it OR high force only in one direction, these are suitable for above applications.

 Specification :
  • BAmerican Specifications: ANSI/ ASME B1.9- 1973 for 70/450 thread Profile.
  • B.S Specifications: B.S 1657 - 1950 used for 70/450 and 0/520 thread profile.
 Manufacturing Range :

Thread Plugs , Thread Rings, Check Plugs & Wear Check Plugs of Diameter from 1/2" to 14" and TPI from 20 to 2.


Yes! I am Interested
REQUEST CALLBACK
Approx. Rs 500 / onwards
Get Best Quote

Suppliers And Exporters of Saw Tooth Thread Ring Gauges,Thread Ring gages, Metric Buttres Thread Gauges.SAW TOOTH THREADS are used in the construction of artillery with the screw type breech block / gun barrels OR vices & screw jack. As Buttress Threads can withstand the axial load placed on it OR high force only in one direction, these are suitable for above applications.

 Specification :

American Specifications: ANSI/ ASME B1.9- 1973 for 70/450 thread Profile.

 Manufacturing Range :

Thread Plugs , Thread Rings, Check Plugs & Wear Check Plugs of Diameter from 1/2" to 14" and TPI from 20 to 2.


Yes! I am Interested
REQUEST CALLBACK
Approx. Rs 500 / onwards
Get Best Quote

NPT thread gages,npt thread gauges,screw thread gauges exporters and suppliers.NPT THREADS are used in general purpose application of pipe assembly, where a pressure tight joint of pipes is made, by making the pipes wrench tight using a sealing compound.

 Specification :

ANSI/ ASME B1.20.1 - 1983 for Basic Type Gauges & American Handbook H-28 Part II - 1957 for Step Limit type.

 Manufacturing Range :

Thread Plugs , Thread Rings, Check Plugs & Wear Check Plugs of Diameter from 1/16" to 12" in both Basic & Step Limit Design.


Yes! I am Interested
REQUEST CALLBACK
Approx. Rs 500 / onwards
Get Best Quote

Leading supplier and exporters of bsptr thread gauges, bsptr thread ring gages,bsptr gauges,taper thread ring gauges. BSPTr Threads can provide pressure tight seal on threads without use of a sealing compound. They are used in pipe assemblies where pressure tight joint is required on threads, without use of sealing compound.

Two Types of Gauges are recommended System A & System B.

 Specification :
  • BS 21 - 1985
  • Indian Standard: Basic Dimensions - IS 554 - 1975 & Gauging Practice - IS 8999-1979.
 Manufacturing Range :

Taper Thread Plugs & Rings for Pipe sizes 1/16" to 6" in both System A & System B Design.


Yes! I am Interested
REQUEST CALLBACK
Approx. Rs 500 / onwards
Get Best Quote

Leading supplier and exporters of Pipe thread ring gages,r thread ring gauges. R / Pipe Threads are used in pipe assemblies where pressure tight joint is required on threads, without use of sealing compound.

 Specification :
  • ISO Standard: Basic Dimensions: ISO 7/1-1994 & Gauging Practice: ISO 7/2-2000,,
  • BS & European standard: BS EN 10226-3 - 2005
  • Indian Standard: Basic Dimensions: IS 554 - 1999 & Gauging Practice: IS 8999-2003.
Manufacturing Range :
  • Taper Fullform Thread Plug - Gauge No.1
  • Taper Fullform Thread Plug with relief - Gauge No.2
  • Parallel Fullform Ring - Gauge No. 3
  • Taper Plain Ring - Gauge No.4.
  • Taper Modified Thread form Check Plug - Gauge No.5
  • Parallel Modified Thread form Check Ring - Gauge No. 6
  • Size Range covered is from pipe diameter 1/16" to 6". Above 6" & up to 12" Diameter gauges are manufactured as per JIS B 0253 -1985 specification.

Yes! I am Interested
 
X

Download Brochure
Graphica Gauges & Tools

Anil Patil (Proprietor)
S. No. 37, Ramnagar, Wadgaon Sheri Ramnagar Tempo Chowk
Pune - 411014
Maharashtra, India
Send Email
© Graphica Gauges & Tools. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited